Front Radial Brake Caliper Kit PZ014 + Mounting Bracket for Vespa Primavera

Our products are designed to ensure maximum precision and performance. Below you will find a list of motorcycle models compatible with this product, so you know exactly which vehicles it can be installed on.

• PIAGGIO VESPA PRIMAVERA (125cc) - Years: 2016-2020 - 3V iGet Anteriore
• PIAGGIO VESPA PRIMAVERA (150cc) - Years: 2016-2020 - 3V iGet Anteriore
• PIAGGIO VESPA PRIMAVERA (50cc) - Years: 2017-2020 - 3V Anteriore
• PIAGGIO VESPA SPRINT (125cc) - Years: 2016-2020 - i.e. 3V iGet Anteriore
• PIAGGIO VESPA SPRINT (150cc) - Years: 2016-2020 - i.e. 3V iGet Anteriore
• PIAGGIO VESPA SPRINT (50cc) - Years: 2017-2020 - 3V Anteriore
• PIAGGIO VESPA TOURING (50cc) - Years: 2017-2018 - Anteriore

Manufacturer: Accossato

PZ014 Front Radial Caliper With Mounting Bracket
Technical Specifications :
Processing: CNC machined
Wheelbase: 84 mm
Offset: 11.5mm
Pistons: 4 in aluminium diam. 24 mm
Dust Seal: YES
Pads: 2 pads code AGPA211 Included -
Available mixes:
- SINTERED to ensure a high and constant friction coefficient at both high and low temperatures, and on wet surfaces
- ZXC a ceramic compound ideal for racing use.
Caliper finish: Black oxidation
Bracket finish: black anodizing
Applications:

Characteristics:
The PZ014 front radial caliper, in combination with the bracket, allows mounting on the applications listed above.
The caliper and bracket are made of CNC aluminum and anodized black.

Warranty and Revision :
The warranty on the pliers is valid for a period of 24 months from the invoice date.
Each caliper produced is associated with a serial number, which makes it individually identifiable from all other radial calipers. The removal of this serial number entails the loss of the warranty and assistance.
The caliper overhaul carried out internally by Accossato technicians is carried out within one working week of receiving the radial caliper. The overhaul includes: external inspection of the product, disassembly of the caliper in all its parts, visual inspection under a microscope of each component of the caliper, visual inspection of the inside of the caliper body, replacement of the gaskets, assembly of all parts, static test and dynamic test. The replaced parts are scrapped and from the time of the overhaul, the caliper acquires an additional 12 months of warranty, upon presentation of the invoice. A further overhaul (the second) does not extend the product warranty. The overhaul does not include the replacement of other external parts not mentioned. In the event of a fall, the overhaul is carried out exclusively if the essential conditions are found for which the caliper can return to working in optimal conditions, equal to a new caliper.

FAQ
What to do in case of a fall?
Since the radial caliper is a safety component, it is absolutely inadvisable to try to resume riding after a fall, especially if you notice or suspect any malfunctions of the caliper.
Are there any Accossato caliper overhaul kits?
There is an official Accossato overhaul kit that can be freely purchased. If non-official products are fitted, the caliper will immediately lose its warranty.
Which brake fluid should I use?
Accossato recommends the use of Accossato Racing DOT 4 brake fluid because it is specifically designed for use by the most demanding customers, who demand maximum performance from their braking system. Accossato technicians recommend great care when using different brake fluids on the market. Specifically, be careful when using DOT 5.1 with a high boiling point: this fluid must in fact be removed from the braking system immediately after the race and/or single use. Failure to immediately remove this fluid from the system may cause damage to the brake system seals.
How much should I tighten the screw after bleeding?
Accossato recommends closing the bleed screw with a torque wrench at 8-10 Nm. Any attempt to close this screw by hand, without measuring its tightening, is not recommended. After bleeding and closing the bleed screw, blow compressed air all around the screw, so as to release the oil trapped in the crests of the thread and in the central hole with a diameter of 3 mm.

Spare Parts and Accessories :
code: PZ014 - radial front brake caliper
code: FL008 - Bracket
code: AGPA122- Pad available in various compounds